What Federal Safety Data Actually Says About Wood Chippers

What OSHA and NIOSH publish about wood chipper deaths, quoted from the source, and what the pattern means when you inspect a used chipper.

Updated: 2026-10-27

Every used chipper listing shows engine hours and knife condition. None shows the risk profile that federal agencies have documented for years. This guide quotes what OSHA and NIOSH publish about chipper accidents and what the pattern suggests you check before you buy. Earlier versions of this guide offered a per-year fatality average and our own advice on pricing safety systems; we removed them because no official source states those figures.

What OSHA counted

OSHA's Safety and Health Information Bulletin on wood chippers reports a multi-year count from its own records. It says that 39 employees were killed in chipper accidents from 1996-2005. It then breaks that count down.

the vast majority (78 percent) resulted from being caught in the chipper, and most of the remainder resulted from "struck-by" accidents.

That is a historical count for a stated period, not a current annual number. No source we fetched publishes a deaths-per-year figure, so we do not give one.

What NIOSH counted

NIOSH used a different dataset and period. Its alert says that 11 workers lost their lives during 1992 through 1997 while working near mobile wood chippers. The two counts cover different years and come from different systems, so they should not be added together.

NIOSH also describes a second kind of death that has nothing to do with the infeed:

The victims in four of the incidents were struck by hoods (guards that cover the rotating chipper knives) that separated from the machines after being improperly opened or closed while knives were still rotating.

OSHA describes the matching safeguard. A hood latch is an interlock, and OSHA says it works by preventing the operator from starting the chipper before the chipper hood is locked and by preventing the operator from opening the hood before the disc or drum has stopped running.

Work practices both agencies describe

  • Stand to the side. OSHA's wording: "Stand to the side of the infeed chute when feeding material into the chipper. This reduces the "caught-in" hazard and allows quick access to emergency stop devices."
  • Same idea from NIOSH. It recommends that workers feeding material are positioned at the side of the machine to allow quick operation of the emergency shut-off device and minimize risk of entanglement in branches.
  • Mind the gloves. OSHA's list includes: "Wear gloves with no cuffs (non-gauntlet)". Bandit's safety page gives a similar warning about loose clothing.
  • Training starts on day one. OSHA's tree care page lists an investigation report titled "A 23-Year-Old Worker Pulled into a Wood Chipper on His First Day on the Job".

Devices worth testing on a used machine

OSHA's bulletin says the ANSI standard for arboricultural operations requires that chippers equipped with a mechanical feed control bar must have quick-stop and reverse feed devices for emergencies. It also describes one manufacturer's bottom feed stop bar as a device that cuts off all power completely when 34 pounds of force are applied to the lower edge of the feed table.

Bandit's own safety page describes an engine-disable plug on the hood locking pin: when this device is unplugged the engine will not operate. It also warns, "Never use a homemade or make-shift hood pin system."

What this means when you inspect

These are our readings of the sources, not agency statements. The feed control bar, any bottom feed stop bar, the reverse function, the hood latch and the engine-disable plug are the devices the agencies and manufacturers name. On a used machine it is reasonable to confirm each one works before you talk price. A missing, bypassed or improvised version of any of them is a reason to walk away.

Bandit's own safety page also says to never operate equipment that is in need of repair. That applies to the seller's machine and to yours after purchase.

Sources

Every quotation above was fetched from the document linked here and matched word for word on 2026-10-27.