Decision dossierEvidence reviewed
disc chipper

Carlton 1290 Used Price & Common Problems

Carlton 1290: one used listing at $43,200. Documented problems: feed-wheel drive gear and disc / main bearing. What to inspect before you buy.

Status: published
Used range$43,200–$43,200
Recallnone found
Known risks3
Sources3
Verified2026-09-11
Buy-Risk Verdict
Inspect before buying · low confidence
Short answer: One observed used comp: 2023, $43,200, a higher-spec 54 hp gas unit that lists ABOVE the 40 hp new base at $39,863, so it is not "typical used". Disc-chipper class-level risks. Held as research pending more comps. Used examples run about $43,200. Basis: Carlton 1290 used listings.

Last verified against the primary source on Sep 11, 2026.

Decision status
inspect

One observed used comp: 2023, $43,200, a higher-spec 54 hp gas unit that lists ABOVE the 40 hp new base at $39,863, so it is not "typical used". Disc-chipper class-level risks. Held as research pending more comps.

Confidence 40%
Market context
$43,200

1 observed comparables

As of Sep 11, 2026
Wear Component Timeline

What can make the cheap machine expensive?

ComponentSeverityDocumented repair cost
Feed-wheel drive gearmediumnot yet verified
Disc / main bearingmediumnot yet verified
Feed-wheel drive gearmedium

Disc-chipper class analog: stripped feed-wheel drive gear caused chute jams on an Altec unit. Not Carlton-confirmed, test feed-wheel engagement under load.

Cost not yet verified
Disc / main bearingmedium

Class-level cost analog: disc bearing part ~a couple hundred dollars; labor/downtime is the real cost.

Cost not yet verified
Gas engine (54 hp Kubota)low

Verify gas-engine compression and hours; gas units often see harder duty cycles in rental fleets.

Cost not yet verified
Approximately 78% of the fatal chipper incidents involved the worker being drawn into the chipper.
— Hazards of Wood Chippers (SHIB 04-16-2008), accessed 2026-09-11

Common questions

How much does a used Carlton 1290 cost?

We have one observed listing, at 43,200 (as of 2026-09-11). One listing is not a price range, so treat it as a single data point.

What fails on the Carlton 1290?

The most cited concerns in our evidence record: Feed-wheel drive gear, Disc / main bearing. See the risk breakdown above for details and sources.

From the research record

  • PRICE (THIN, 1 used comp, SECONDARY, machinio, as-of 2026-09-11): 2023 $43,200 Bossier City LA (listing 95451588, 54hp Kubota gas, 9"). NOTE: it lists ABOVE the 2025 new base ($39,863, 40hp gas, listing 109216355) because it is a higher-spec 54hp unit — do NOT present $43,200 as "typical used."
  • SAFETY (PRIMARY, OSHA SHIB 04-16-2008): disc hood latched before start; feed/panic bars, LOTO. Carlton is owned by Bandit Industries.

Sources

  1. Carlton 1290 used listingsweb · research-cited · accessed 2026-09-11
  2. Hazards of Wood Chippers (SHIB 04-16-2008)official · verified-official · accessed 2026-09-11
  3. 2023 Carlton 1290 (used)web · research-cited · accessed 2026-09-11
Spot an error? Challenge this record

Found an out-of-date code section, a wrong verdict, or a better primary source? Tell us. Corrections that check out are applied, with the change shown in history. That is our standing policy.

Related records

More in Carlton

All Carlton records →