Last verified against the primary source on Sep 11, 2026.
One observed used comp: 2022, ~400 hrs, $36,000 (new-unit reference $75,420). Carlton-specific failure data is scarce, so the risk profile leans on disc-chipper class analogs, honestly labeled. Held as research pending more comps.
Confidence 40%1 observed comparables
As of Sep 11, 2026What can make the cheap machine expensive?
| Component | Severity | Documented repair cost |
|---|---|---|
| Feed-wheel drive gear | medium | not yet verified |
| Disc / main bearing | medium | not yet verified |
| Chipper knives / anvil | medium | not yet verified |
Disc-chipper class analog: on an Altec disc chipper a stripped feed-wheel drive gear caused chute jams and was replaced twice in a week. Not Carlton-confirmed, verify the feed-wheel drive engages smoothly under load.
Cost not yet verifiedClass-level cost analog: a new disc bearing part runs "a couple hundred dollars," but labor and downtime are the real cost. Inspect for disc runout and bearing noise.
Cost not yet verifiedDisc chippers throw poor chip quality and load spikes when knives dull, inspect knife edges and anvil clearance.
Cost not yet verifiedApproximately 78% of the fatal chipper incidents involved the worker being drawn into the chipper.
Common questions
How much does a used Carlton 1712 cost?
We have one observed listing, at 36,000 (as of 2026-09-11). One listing is not a price range, so treat it as a single data point.
What fails on the Carlton 1712?
The most cited concerns in our evidence record: Feed-wheel drive gear, Disc / main bearing, Chipper knives / anvil. See the risk breakdown above for details and sources.
Live listings on eBay
Live listings via the eBay Browse API. Links are affiliate-tracked and Chipper Risk may earn a commission on qualifying purchases, at no cost to you.
From the research record
- PRICE (THIN, 1 used comp, SECONDARY, machinio, as-of 2026-09-11): 2022 ~400 hrs $36,000 Spring City PA (listing 116208103, 74hp Kubota, 12"×17" throat, 6500 lbs). New-unit reference $75,420 Bossier City LA (listing 109216378).
- SAFETY (PRIMARY, OSHA SHIB 04-16-2008): disc hood must be "completely closed and latched" before start; feed control bar, panic bar, LOTO. Carlton is owned by Bandit Industries (since 2011).
Sources
- Carlton 1712 used listingsweb · research-cited · accessed 2026-09-11
- Hazards of Wood Chippers (SHIB 04-16-2008)official · verified-official · accessed 2026-09-11
- 2022 Carlton 1712 in Spring City, PAweb · research-cited · accessed 2026-09-11
Spot an error? Challenge this record
Found an out-of-date code section, a wrong verdict, or a better primary source? Tell us. Corrections that check out are applied, with the change shown in history. That is our standing policy.